.459" 535 Grain "Money" Bullet Mould 1-Cavity
$205.00
In stock
Item Number
JIM459535M1
This is a "Money" design bullet originally designed by Dan Theodore. This mould design makes for a more streamline shape and flatter trajectory. 1.460" long with a nose length of .770" and standard grease grooves.
This group was fired out of a Remington Hepburn with a Krieger barrel in 45-90 using this mold at 400 yards. The load was 68.4 grains of 1 1/2 Swiss, GM150M primers, .030 poly wad, 20-1 alloy, .459" diameter, 10 shots are 4" vertical by 7 3/4" horizontal. The wide shot on the right was from the wind.
***Buffalo Arms Co. Bullet molds use Saeco bullet mold handles item number SAE29000, CTHANDLES or CTALUMINUM handles sold seperately***
| .459" 535 Grain "Money" Bullet Mould 1-Cavity |
Write Your Own Review