.407" 210 Grain Flat Nose Bullet Mould for the Uberti 1876 in 40-60 Winchester etc. 2-Cavity

$220.00
Out of stock
Item Number
JIM2407210

Please call us (208) 263-6953 if you would like to place this item on back order.

This is a copy of the old Ideal bullet mould 403168 in a 2-cavity mold with the addition of a crimp groove. Some of the new 1876 Models use a .407" bullet. You can use .406" diameter if you are loading with black powder and casting the bullet out of soft lead, say 20-1 alloy or softer. Bullet OAL .707", distance from crimp groove to nose .365", .225" diameter meplat and two grease gooves. ***Uses Saeco bullet mold handles item number SAE29000***
This is a copy of the old Ideal bullet mould 403168 in a 2-cavity mold with the addition of a crimp groove. Some of the new 1876 Models use a .407" bullet. You can use .406" diameter if you are loading with black powder and casting the bullet out of soft lead, say 20-1 alloy or softer. Bullet OAL .707", distance from crimp groove to nose .365", .225" diameter meplat and two grease gooves.

***Uses Saeco bullet mold handles item number SAE29000***

More Information
.407" 210 Grain Flat Nose Bullet Mould for the Uberti 1876 in 40-60 Winchester etc. 2-Cavity
Write Your Own Review
You're reviewing:.407" 210 Grain Flat Nose Bullet Mould for the Uberti 1876 in 40-60 Winchester etc. 2-Cavity
Your Rating