Grendel Basic (Small Rifle primer)Un-tapered (W/No caliber designation)
1.540 - 1.560 O.A.L.
This brass is the same as the standard 6.5 Grendel brass except that it has not been formed and has no caliber designation on the headstamp. It should work for most 6.5 Grendel and 7.62x39mm based wildcats. This brass has not been annealed, and will require a body anneal prior to forming, and possibly a neck anneal after forming, depending on how far it is necked down. Wall thickness at the mouth of this brass is approximately .009", which is the same as our 6.5 Grendel brass prior to forming (the walls will get thicker when formed down, and the case will also get longer). Length is approximately 1.550"
∗Since this is a basic case, and Starline or Buffalo Arms Co. has no control over how it is formed, we accept no liability and offer no warranty in its use or your inability to properly form cases. Since this case has not been formed there may be more out-of-round mouths than normal.
This Grendel Basic case can be formed into 6.5 Grendel and 7.62x39 based wildcats such as the .22-6.5 Grendel, 6mm Grendel, 243 LBC and 9x39mm.
Use spaces to separate tags. Use single quotes (') for phrases.