Login Register
Buffalo Arms Co. - Website Home
Screw Set Front10-16x.645 Rear 10-16x.645 Wood - Product Review
Item: MAR995026  Temporarily Unavailable - Back-Orders OK
Expected Delivery Date: 2/14/2016
Manufacturer: Marble Arms
Return To Product Detail
Average Rating
 1 star
(based on 1 review)
You must be logged in to write a review

All Reviews For This Product
Page 1 of 1
Reviewed By: Thorn C.
Review Date: 1/29/2012
I used these screws for my H&R Buffalo Classic. They are very soft,broke one off about 2/3 of the way in. I started with a 9/64" drill bit witch is standard for a #10 wood screw. But you will need to use a 5/32" or a 11/64" to do the job (Black Walnut is pretty hard). Also the wood screws were to long for my rifle. They interfere with bolt that attaches the stock to the receiver. You will have to take about 1/8" of a inch off so the bolt will clear. Each stock will probability be different so check it first. There are better screws out there for this application, check you local hardware store.
Page 1 of 1
WARNING: Discharging firearms in poorly ventilated areas, cleaning firearms or handling ammunition may result in exposure to lead and other substances known cause birth defects, reproductive harm and other serious physical injury. Have adequate ventilation at all times. Wash hands thoroughly after exposure.
Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer.