This is a Baldwin Long Range Soule sight for Remington rifles. These are for original Remington Rolling Block or Hepburn firearms using 10-28 mounting screws. If you have a DZ Arms Hepburn be sure to tell us as these use 10-32 mounting screws. If you are used to small bore and high power sights then take a look at these. The sight windage and elevation adjustments move the same as sights on small bore and high power sights with clock wise down for elevation and left on your windage. These sights feature a slotted adjustable spring anchored by the front mounting screw (rear on zero on the Long Range Soule sights. Thirty minutes of windage each side of zero on the Long Range Soules. Each sight is machined from solid steel to precise tolerances. The adjustable eyepieces are copies after antique Lyman sights with five different size holes for use in varying light conditions. The scales, cut on a pantograph, are standard vernier. Baldwin staffs are approximately .040" wider than other tang staffs to provide more stability, better durability and ease of reading.
SPECIAL NOTE-Be sure you are ordering the correct sight for your rifle. There are absolutely no returns on sights that have been mounted.